• Thank you for participating in our forums, we are very happy that you're here. We hope you find what you need, and also hope you will help others when the opportunity arises.

    Some things to note:

    1. We have pre-loaded the board with many manufacturers and models, but we know there are many we have missed. It's important to us that you get the information you need, so please post your questions in the closest forum topic that you can find(It can always be moved later.) Then, please post in the Content Request forum the make and model you need and we will add it to the board.

    2. Please let us know what you think. We are very open to feedback and suggestions. You can use the "Forum suggestions and feedback" and "Content Requests" forums to help make this board better.

    Thank you!

    **You can remove this notice by clicking the "X" in the top right corner.

Need help identifying a couple of wires in the engine harness

J

John

Administrator
Staff member
I recently had work done to my Regal 28 Express where they had to pull the motor. When it was returned to me, the engine harness was not secured and some of the wiring got pinched in the steering. I think everything is ok, except for 2 wires that appear broken. Everything seems to work as expected, so I'm not sure these are used for any of the options I have. But I would like to know what they are for. Would anyone be able to look at their wiring, or a shop manual and see if they can tell me where the blue wire w/black tracer and black wire go? Please see pictures below.

brokenWire.png

BrokenWire2.png


Any help would be greatly appreciated.
 
You must log in or register to reply here.
Back
Top